在线国产观看-在线国产高清-在线国产福利-在线国产二区-在线国产91-在线观影

東莞市創億嘉潤滑油有限公司 服務熱線:0769-81283290 13725804996
快捷 高效 周到 貼心 全心全意為客戶服務 工業潤滑油、工業潤滑脂、工業潤滑劑咨詢熱線:13725804996 電話:0769-81283290
美孚潤滑油 殼牌潤滑油 嘉實多潤滑油
BP潤滑油 福斯潤滑油 加德士潤滑油
克魯勃潤滑油 道達爾潤滑油 埃索潤滑油
協同潤滑油 出光潤滑油 摩托瑞斯潤滑油
  • 東莞創億嘉潤滑油有限公司

    電話:0769-81283290

    聯系人:劉超

    手機:13725804996

    企業QQ:1352876343

    郵箱:[email protected]

    網址:m.110mswg.cn

    地址:廣東省東莞市南城區高新產業園區宏一路

    郵編:523073

聯系方式
殼牌潤滑油系列 > 殼牌航空潤滑油 > AEROSHELL FLUID 31
AEROSHELL FLUID 31 詳細說明 (瀏覽1416次)
AEROSHELL FLUID 31
AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid
with greatly improved fire resistance characteristics when compared with
conventional petroleum products.
AeroShell Fluid 31 has a specially designed base stock which imparts a
relatively high flash point, excellent low temperature properties and good
oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated
with high technology additives to provide oxidation and corrosion
resistance, antiwear, and anti-foaming protection.
AeroShell Fluid 31 is superclean filtered to ensure optimum performance in
particulate monitored systems.
AeroShell Fluid 31 is dyed red.
The useful operating temperature range is –40 to +205°C.
APPLICATIONS
AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and
missile systems operating from –40°C to +205°C . This fluid should be
considered for use in auto pilots, shock absorbers, brakes, flight control
systems, hydraulic servo-controlled systems and other systems using
synthetic elastomer seals.
An increasing number of aircraft manufacturers now recommend use of this
type of fluid in aircraft hydraulic systems in preference to mineral hydraulic
oils. This move has been prompted by need to use fluids with better fire
resistant properties.
AeroShell Fluid 31 is also approved for use in the Honeywell (formerly
Garrett) cooling turbine (cabin air compressors).
Increasingly this type of hydraulic fluid is being adopted for use in
hydraulic systems of military aircraft in place of mineral hydraulic fluids.
AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in
contact with incompatible seal materials. Refer to the General Notes at the
front of this section for further information.
AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and
71 and can be used in systems designed to operate with MIL-PRF-5606,
MIL-PRF-6083, MIL-PRF-87257 and MIL-PRF-46170 fluids.
Chlorinated solvents should not be used for cleaning hydraulic components
which use AeroShell Fluid 31. The residual solvent contaminates the
hydraulic fluid and may lead to corrosion.
www.shell.com/aviation
190
Hydraulic Fluids
SPECIFICATIONS
U.S. Approved MIL-PRF-83282D
British (MIL-PRF-83282D)
French Equivalent to DCSEA 437/A
Russian –
NATO Code H-537
Joint Service Designation OX-19
PROPERTIES MIL-PRF-83282D TYPICAL
Oil type Synthetic Synthetic
Hydrocarbon Hydrocarbon
Kinematic viscosity mm
2
/s
@ 205°C 1.0 min 1.07
@ 100°C 3.45 min 3.53
@ 40°C 14.0 min 14.33
@ –40°C 2200 max 2098
Flashpoint
Cleveland Open Cup °C 205 min 237
Fire Point °C 245 min 251
Total Acidity mgKOH/g 0.10 max 0.01
Evaporation loss 6.5 hrs
@150°C % m 20 max 10
Relative density @ 15.6/15.6°C Report 0.850
Pourpoint °C –55 max Below –55
Table continuedNOTES
The AeroShell Book
Edition 18 2003
193
Hydraulic Fluids
www.shell.com/aviation
192
Hydraulic Fluids
PROPERTIES MIL-PRF-83282D TYPICAL
Low temperature stability
72 hrs @ ?40°C Must pass Passes
High temperature stability
100 hrs @ 205°C Must pass Passes
Gravimetric Filtration, mg/100ml 0.3 max 0.2
Filtration time minutes 15 max Less than 15
Particle Count, Automatic, per Lt
5 to 15 μm 10000 max 1331
16 to 25 μm 1000 max 190
26 to 50 μm 150 max 55
51 to 100 μm 20 max 4
>100 μm 5 max 0
Water content ppm 100 max 82
Foam resistance ASTM Seq 1 Must pass Passes
Flame propagation cm/s Must pass Passes
Rubber swell, NBR-L % 18 to 30 Passes
4-Ball Wear, 1 hr @ 75°C
scar dia, mm
1 kg load/1200 rpm 0.21 max 0.18
10 kg load/1200 rpm 0.30 max 0.24
40 kg load/1200 rpm 0.65 max 0.50
Oxidation & corrosion stability
168 hrs @ 121°C
– metal weight change Must pass Passes
– viscosity change @ 40°C % 10 max Less than 10
– change in acidity mgKOH/g 0.2 max Less than 0.02
Flammability Must pass Passes
A viscosity/temperature curve is shown at the end of this section.
上一產品:AEROSHELL SSF AND LGF/起落架液壓油Hydraulic Fluids
下一產品:AEROSHELL CALIBRATING FLUID 2
版權所有:東莞市創億嘉潤滑油有限公司   粵ICP備19160599號
工業齒輪油生產廠家,想了解批發價格,用途,哪個牌子好,品牌哪家好請聯系我們.
工業潤滑油
主站蜘蛛池模板: 亚洲成人中文 | 蜜桃影像传媒推广 | 高清一区高清二区视频 | 无码爽死成人777在线观看网站 | www.av网站| 日本又黄又裸一级大黄裸片 | 2048论坛永久入口 原创合集 | 猛男深夜狂cao小男生 | 国产精品青青在线观看香蕉 | 操日日| 黄色aaa级片| 免费日批视频 | 单亲乱l仑在线观看免费观看 | 色老板最新网站视频地址 | 欧美专区视频 | 欧美一级视频免费观看 | 国产精品视频免费视频 | chinese军人@gay | 日本无卡视频 | 小泽玛丽av无码观看 | 俄罗斯海滩厕所偷窥 | 天堂网在线.www天堂在线视频 | 秋霞午夜伦午夜高清福利片 | 欧美视频精品一区二区三区 | 亚洲xxxxxhd奶水女人 | 日本xxx18hd| 出a级黑粗大硬长爽猛视频 吃胸膜奶视频456 | 欧美日韩国产另类一区二区三区 | 国色天香社区视频免费高清在线观看 | 四虎在线永久免费视频网站 | 色综合网天天综合色中文男男 | 97热在线| 丝袜性爱| 91精品国产麻豆国产自产在线 | 青青青青青国产免费手机看视频 | 91精品大神国产在线播放 | 精品久久99麻豆蜜桃666 | 久久香蕉国产免费天天 | 国产精品亚洲午夜不卡 | 性刺激欧美三级在线现看中文 | 日本一区二区免费在线 |